Wireless Mesh Networks for Video Surveillance COFDM Audio Data
ST9602MD Specs.pdf
ST9602MD User Manual.pdf
Introduction
A 2x2 MIMO-based Ethernet radio, ST9602MD is designed for
mission-critical video, voice, and data.It is intuitive, easy to
deploy, and can be used to create point-to-point,
point-to-multipoint, mesh, and mobility networks with a real
throughput of up to 80 Mbps.
Main Features
1.Tri Band capability offered in L-band (1.559-1.577GHz), S-band
(2.412-2.462GHz) and UHF-band (300-900MHz)
2.Self-forming, self-healing Mesh architecture
3.Ideal for use for wide area coverage & multi-hop, mobile
applications such as robotics and city NLOS wireless video
transmission
4.IP connectivity for additional backhaul offering beyond mesh
5.Low latency IP communication
6.Support 2*2 MIMO
7.Built in encryption AES256 available subject to export control
| Product characteristics |
| Frequency range | 570-590MHz(350MHz-1.4G on request) |
| Channel bandwidth | 5M/10M/20MHz(adjustable) |
| Transmission power | 33dBm |
| Installation modulation | BPSK/QPSK/16-QAM/64-QAM |
| Forward error correction | 1/2, 2/3, 3/4, 5/6(option) |
| Receiver sensitivity | up to -92dBm |
| Transmission rate | Maximum 80Mbps |
| Networking capability | Ad-hoc network 16 hop, nodes more than 42 units |
| Data characteristics |
| RF interface | 2.4G WIFI SMA*1, 570-590MHz N type *2 |
| Network interface | 10/100(self-adaption) |
| Serial Interface | Bit rate 9600-115200bps Adjustable |
| Expansion interface | debug uart*1 (built-in) |
| Network connect time | Uptime approx. 56s, connected standby less than 100ms |
| Encryption | AES 256 |
| Electrical characteristics |
| Voltage | DC 9-28V |
| Current | Standby Current 500mA |
| Max work Current 3A |
| Power consumption | Average power consumption 10W |
| Physical characteristics |
| Working temperature | -20~+70℃ |
| Storage temperature | -30℃~ +90℃ |
| Measurement | 220mm*155mm*52mm |
| Weight | 1.4KG |
Package
1 x ST9602MD,
2 x Manpack Antenna,
1 x Battery(12V/21Ah),
1 x Manpack Harness,
1 x Power Cable,
1 x RS232 Data Cable,
1 x Battery Charger
1 x Wifi Antenna
1 x Hand Grip
