| Item | Description |
| Hardware Parameter |
Interface | 2*10/100M Ethernet port 1*Main Ethernet port 1*Sub Ethernet port |
| POE power supply |
| Indicator light | Power state light |
| 4 grade signal strength light |
| LAN light |
| MODE light |
| Working frequency | 5.125-5.850GHz |
| Standard | IEEE 802.a/n |
| RF power | Max 27dbm (500mw), Adjustable by software |
| Rate | Max 300Mbps |
| Modulation | 802.11n: 2x2MIMO |
| 802.11a: OFDM, 6Mbps/-95dBm |
801.n MCS0: -88dBm MCS7: -73dBm |
| Antenna | Dual polarization 12dbi Horizontal: 30 degree Vertical: 30 degree |
| Reset | Support hardware/software reset |
| RAM | 64MB |
| FLASH | 8MB |
| Size | 246*106*60mm |
| Weight | 370g |
| Packing size | 36*14*7.5cm |
| Packing weight | 0.72kg |
| Input voltage | Wide voltage input DC 12V-24V |
| Power | ≤8W |
| Waterproof grade | IP65 |
| Working temperature | -30℃～+70℃ |
| Saving temperature | -20℃～+80℃ |
| Working humidity | 0～100% |
| Software |
| Working mode | Route mode: Client replaces all terminal authentication |
| Bridge mode: All terminals need to be separately certified |
| WDS | Support |
| Network protocol | PPTP, L2TP, IPsec
|
| PPPoE |
| DHCP Client/Server |
| NAPT, NTP |
| VLAN setting |
| Wireless function | Peripheral site detection/ Channel scan |
| Priority AP Connection Setting Binding (BSSID) |
| Channel Auto selection |
| Security policy | Encryption: WEP, TKIP, AES
|
| Wireless safety: Open system, shared key WPA/WPA-PSK,
WPA2/WPA2-PSK, 802.1x(PEAP,TLS,TTLS), WAPI |
| Authentication function | WEB account/ password PPPOE access authentication Route mode Client replaces all terminal authentication Bridge mode All terminals need to be separately certified Multi-user prtal authentication separately Multi-user prtal authentication separately |
| Network protection | Support network rate-limiting |
| MAC address visiting control |
| System service | Support virtual DMZ, port forwarding. |
| Support UPnP Automatic port mapping |
| Support VPN unvarnished transmission(PPTP, L2TP, IPSec) |
| Configuration Management | Based on WEB, CPE built-in WEB server |
| Remote software update(HTTP) |
| Support Telnet connect |
| Support syslog system record |
| Support SSH service |
| Troubleshooting | Automatically detect network status and automatically reconnect
after disconnection |
